Promac Wall & Floor Sealer: Multi-surface clear sealer

Promac Wall & Floor Sealer is a clear acrylic sealer for decorative use on cementitious and stone based surfaces. This product provides a durable and pristine sheen finish to sound prepared surfaces without requiring the use of a priming product.

• Easy application

• No priming product needed

• Enhances surface appearance

• Improves surface durability

• UV & all weather resistant

• Non-yellowing

• Easy to clean

This product will cover approximately 8 - 10 m² per litre per coat depending on the surface porosity & profile, application tools and technique.

Apply this product with a quality brush, roller or spray equipment to both smooth and rough surfaces in a well-ventilated area. This product will appear milky but will dry clear.

Walls: Apply two or more coats of Promac Wall & Floor Sealer to the prepared surface. Allow to dry for a minimum of 4 hours between coats.

Floors: Apply two or more coats of Promac Wall & Floor Sealer to the prepared surface. Allow a minimum of 4 hours drying time between coats. The second coat should be applied in a cross direction to the first coat to achieve uniformity. Promac Wall & Floor Sealer may be subjected to light foot traffic 4 hours after application. Allow for a minimum of 24 hours after the final coat has been applied before introducing heavy foot traffic or covering with flooring or carpeting. This product is NOT recommended for surfaces subject to vehicular traffic.

Clean all tools (brushes, rollers & spray equipment) while wet with Promac Brush Cleaner and/or water after use. Do not allow the product to dry on equipment.

1L, 5L, 20L