Promac Steel Cleaner: Cleans and preps steel surfaces

  • Promac Steel Cleaner is an acid based fluid used for the cleaning and preparation of steel & metal surfaces before painting. It removes surface contaminants and creates the desired profile for painting by acid etching the surface. 

    • Ready for use 

    • Aids in rust removal

    • Aggressive degreasing agent

    • Etching properties for increased adhesion of paint system 

  • Promac Steel Cleaner is ready for use. Shake before use. Using a suitable brush or roller, apply Promac Steel Cleaner by working a maximum area of 4 m² at a time. Within 5 minutes of applying, thoroughly remove all traces of the product with clean water containing a 5% household ammonia solution. Dry the surface immediately thereafter. Repeat if necessary. Apply an appropriate Promac primer or base coating to the surface within 2 to 4 hours.

    NB: Promac Steel Cleaner may not exceed 5 minutes of uninterrupted contact with the surface. Exceeded exposure may cause the protective zinc layer to dissolve.

  • 1L, 5L

Colours