Promac Fungi Cleaner: Prevents growth of mildew, fungi & algae

Promac Fungi Cleaner is a liquid formulated to remove and destroy organic contaminants such as fungi and algae from all washable surfaces. It is ideal for cleaning and pre-treating problem areas before and after applying the paint system. This product is suitable for industrial, institutional and domestic areas.

• Ready for use

• Easy to use

• No harmful chemicals

• Ph 8 – 100%

• Clean conditions

• Thoroughly removes organic contaminants and dirt

• Effective on cementitious surfaces, plastic and wood

• Active ingredient – QAC – 20%

Shake before use. Apply undiluted by brush or spray. Allow the product to dwell on the surface for at least 5 to 10 minutes. Heavily affected areas must be slightly agitated with an appropriate bristle brush while the product is on the surface. Thereafter, wash off with fresh water. Repeat the procedure if necessary. Allow the surface to dry before applying any coating.

TO REMOVE POLISH, OILS, GREASE AND TAR

Dab onto a clean cloth and wipe off. Heavy duty degreasing: Swab Promac Brush Cleaner onto the surface using a bristle brush or broom. Leave for approximately 15 minutes, then flush off thoroughly with water while scrubbing with a brush or broom. Repeat if necessary. In such cases, allow the surface to dry before reapplying.

TO CLEAN DRIED PAINT BRUSHES, ROLLERS AND PAINTING TOOLS

If enamel paint has dried on the brush or roller, soak it in Promac Paint Stripper first, allowing the paint to soften and blister, then clean with Promac Brush Cleaner. Squeeze out and rinse well with water. Repeat if necessary.

Clean all tools (brushes & spray equipment) while wet with water.

1L