GOODWOOD


 

TIMBERTHANE - EXTERIOR GLOSS VARNISH

PRODUCT PROPERTIES:
•  Superior-quality, clear wood varnish for exterior use.
•  Contains UV light absorbers and stabilisers for exterior durability, and linseed oil for
   optimum penetration and adhesion to wood.
•  Available in gloss finish, as well as in a standard range of colours.

USES: 
For application to all exterior wooden surfaces where only the best quality finish is required. May also be used over previously varnished exterior surfaces, provided the surface is sound and not cracked or flaking.

SPREADING RATE: 
Approximately 8-10m² / litre.

APPLICATION: 
Stir contents thoroughly and apply using a brush or roller. This varnish may be sprayed after it has been diluted with a suitable thinner. If reduced viscosity is required a minimal amount of Mineral Turpentine can be added. For new wood first apply a coat thinned in volume by 10%, with turpentine. Let the coat dry overnight and sand lightly using 320-400 grit papers. Remove all dust. Remove all dust before applying a second and third undiluted coat, sanding lightly in between coats. For maximum protection the application of three coats of varnish is advised.

CLEANING: 
Equipment is easily cleaned using Enamel Thinners or Lacquer Thinners. The dried film may be removed using RB10 Quick Stripper or RB10 Aerosol Paint Stripper.

 

DOWNLOAD SAFETY DATA SHEET