COPAL VARNISH – INTERIOR HIGH GLOSS VARNISH
• Clear, glossy wood varnish for interior use.
• Easy to apply, with good flow properties.
To decorate and protect interior wooden surfaces. such as skirting boards, doors, paneling, furniture etc.
Approximately 8-10m² / litre.
Stir contents thoroughly and apply using a brush or roller. This varnish may be sprayed after it has been diluted with a suitable thinner. If reduced viscosity is required add a minimal amount of Mineral Turpentine. For new wood apply a first coat, that has been thinned by 10% in volume using turpentine. Let the coat dry overnight, and sand lightly using 320-400 grit papers. Remove all dust before applying a second and third undiluted coat, sanding lightly in-between coats. For maximum protection the application of three coats of varnish is advised.
• Not recommended for exterior use.
• Not recommended for floors.
• Do not apply to wet or damp wooden surfaces.
Equipment is easily cleaned using Enamel Thinners or Lacquer Thinners. The dried film can be removed using RB10 Quick Stripper or RB10 Aerosol Stripper.